Chapter 8. Administration - Subsystem Management 199
Draft Document for Review March 28, 2011 12:24 pm 7914Admin_Subsystem.fm
Figure 8-6 Automatic configuration
Detailed description of automatic configuration of unconfigured disk drives on DS3500
Storage Subsystem is in 12.6.1, “Automatic configuration” on page 310.
Save Configuration
Use the Storage Subsystem Configuration Save Configuration option (Figure 8-7
on page 200) to save the logical configuration settings of a storage subsystem to a script file.
Later, you can select Tools Load Storage Subsystem Configuration in the Enterprise
Management window to copy the configuration data back from the saved file to a storage
subsystem with the same hardware configuration. For more information about the Load
Storage Subsystem Configuration option, refer to Chapter 6, “Administration - Enterprise
Management” on page 161.
To Next Page
Loading...
