Chapter 5. Installing IBM System Storage DS Storage Manager 155
Draft Document for Review March 28, 2011 12:24 pm 7914InstallSM01108.fm
Figure 5-23 Select Addition Method - Automatic
3. Click Yes to begin an initial automatic discovery of hosts and storage subsystems attached
to the local subnetwork as shown in Figure 5-24.
Figure 5-24 Automatic Discovery
After the initial automatic discovery is complete, the Devices tab of the Enterprise
Management Window displays all hosts and storage subsystems attached to the local
subnetwork.
5.4.2 Performing a manual discovery of storage subsystems
You can manually add more hosts or storage subsystems. You can use this option to
selectively manage a group of storage subsystems from an SMclient. You can also use this
option to add additional devices to be managed that were not discovered during the SMclient
initial discovery.
Note: The Enterprise Management Window can take up to a minute to refresh after an
initial automatic discovery.
To Next Page
Loading...
