7914support2-0209.fm Draft Document for Review March 28, 2011 12:24 pm
368 IBM System Storage DS3500: Introduction and Implementation Guide
Figure 14-42 Select the NVSRAM file
5. If you want to transfer the firmware and NVSRAM and activate these immediately, then
click the OK... button in Figure 14-42. You will be asked to confirm that you want to transfer
and activate the firmware and NVSRAM immediately. See Figure 14-43 on page 369.
Note: The process to transfer the firmware and NVSRAM images to the DS3500, but
activate them later is described in step 6 below.
To Next Page
Loading...
