Linux Config.fm Draft Document for Review March 28, 2011 12:24 pm
626 IBM System Storage DS3500: Introduction and Implementation Guide
5. Now verify that the disk configuration is correct. A detailed verification procedure is shown
in 20.1.4, “Scan and verify the storage logical drive” on page 612
Note: In previous versions SLES versions, you could add the hotplug option to the
device in the /etc/fstab file to mount the iSCSI targets. For SLES 11, the hotplug option
is no longer available and you have to use the nofail option instead.
To Next Page
Loading...
