AIX.fm Draft Document for Review March 28, 2011 12:24 pm
662 IBM System Storage DS3500: Introduction and Implementation Guide
2 Preservation Install
Preserves SOME of the existing data on the disk selected for
installation. Warning: This method overwrites the usr (/usr),
variable (/var), temporary (/tmp), and root (/) file systems. Other
product (applications) files and configuration data will be destroyed.
6. Verify the disk in which the AIX operating system is going to be installed. Press “0” to
accept the current disk as shown in Example 21-34.
Example 21-34 Verify the disk
Change Disk(s) Where You Want to Install
Type one or more numbers for the disk(s) to be used for installation and press
Enter. To cancel a choice, type the corresponding number and Press Enter.
At least one bootable disk must be selected. The current choice is indicated
by >>>.
Name Location Code Size(MB) VG Status Bootable
>>> 1 hdisk0 none 11264 rootvg Yes No
>>> 0 Continue with choices indicated above
55 More Disk Options
66 Disks not known to Base Operating System Installation
77 Display Alternative Disk Attributes
88 Help ?
99 Previous Menu
7. The next menu is the same as in step 3. Press “1” to confirm the settings shown in the
menu as shown in Example 21-35.
Example 21-35 Confirm the installation
Overwrite Installation Summary
Disks: hdisk0
Cultural Convention: C
Language: C
Keyboard: C
JFS2 File Systems Created: yes
Graphics Software: no
System Management Client Software: yes
Enable System Backups to install any system: yes
Optional Software being installed:
>>> 1 Continue with Install
8. A similar window as shown in Example 21-36 will appear. The files copy has begun. At the
end of this, the system will be restarted.
To Next Page
Loading...
Need help?
General