40000014-00000000 The [arg1] on system [arg2] cleared by user [arg3].
Explanation: This message is for the use case where a Management Controller Event Log on a system is cleared by
a user.
May also be shown as 4000001400000000 or 0x4000001400000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0020
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000015-00000000 Management Controller [arg1] reset was initiated by user [arg2].
Explanation: This message is for the use case where a Management Controller reset is initiated by a user.
May also be shown as 4000001500000000 or 0x4000001500000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0021
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000016-00000000 ENET[[arg1]] DHCP-HSTN=[arg2], DN=[arg3], IP@=[arg4], SN=[arg5], GW@=[arg6],
DNS1@=[arg7] .
Explanation: This message is for the use case where a Management Controller IP address and configuration has
been assigned by the DHCP server.
May also be shown as 4000001600000000 or 0x4000001600000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0022
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000014-00000000 • 40000016-00000000
Appendix A. Integrated management module 2.1 (IMM2.1) error messages 285
To Next Page
Loading...
