Icom IC-905 - Page 146

11
D-STAR OPERATION (ADVANCED)
11-14
Viewing received call signs
<3rd page>
• RX MESSAGE: Displays any message included in
the received call, if entered.
• RX TIME: Displays the date and time the call
was received.
<4th, 5th page>
Displays position data of the caller station. If a
received signal has no data, no position data is
displayed.
4. To close the RX HISTORY screen, push .
TIP: To delete RX HISTORY data
On the RX HISTORY or the detail screen, push
, then touch “Delete” or “Delete All.”
TIP: The “RX RPT1” setting may di󰀨er, depending
on the way the call was made.
Example 1: When a Local area call is received.
JM1ZLK
calling you...
JM1ZLK
calling you...
JM1ZLK
calling you...
JM1ZLK
calling you...
JM1ZLK
calling you...
JM1ZLK
calling you...
RXRPT2
RXRPT1
CALLED
CALLER
YOUR STATION
Example 2: When a Gateway call is received.
JM1ZLK calling from
JP1YIU node A...
JM1ZLK calling from
JP1YIU node A...
JM1ZLK calling from
JP1YIU node A...
JM1ZLK calling from
JP1YIU node A...
RXRPT2
RXRPT1
JM1ZLK calling from
JP1YIU node A...
JM1ZLK calling from
JP1YIU node A...
CALLER
GW
INTERNET
INTERNET
CALLED
YOUR STATION
D Viewing the call signs on the RX History screen