Icom IC-905 - Page 160

11
D-STAR OPERATION (ADVANCED)
11-28
Entering new information into the repeater list
D Entering new information into the repeater list
Step 14. Selecting the repeater tone frequency
L This item is displayed when Step 2. Selecting the
communication type is set to “FM Repeater” or “FM
Simplex.”
L This setting is required when Step 13. Setting the tone
is set to “TONE” or “TSQL.”
1. Touch “REPEATER TONE.”
2. Set the repeater tone frequency.
3. Push .
Step 15. Selecting the position data accuracy level
L When the Near Repeater Search function is not used, or
the distance between your position and a repeater is not
needed, select “None,” and go to Step 18. Setting the
UTC o󰀨set.
1. Touch “POSITION.”
2. Touch the position data accuracy level.
• None: Select when the repeater has no
position data.
• Approximate: Select when the entered position data
is approximately correct.
• Exact: Select when the entered position data
is exactly correct.
Step 16. Entering the latitude
L This item is displayed only when Step 15. Selecting the
position data accuracy level is set to “Approximate” or
“Exact.”
1. Touch “LATITUDE.”
2. Enter the latitude.
L Touching [N/S] selects a north latitude (N) or a south
latitude (S).
3. After entering, touch [ENT].
Step 17. Entering the longitude
L This item is displayed only when Step 15. Selecting the
position data accuracy level is set to “Approximate” or
“Exact.”
1. Touch “LONGITUDE.”
2. Enter the longitude.
L Touching [E/W] selects an east longitude (E) or a
west longitude (W).
3. After entering, touch [ENT].
Step 18. Setting the UTC o󰀨set
L Universal Time Coordinated (UTC) o󰀨set is the time
di󰀨erence between UTC and repeater local time. This is
a useful function to know the local time of the destination
repeater before you make a call.
1. Touch “UTC OFFSET.”
2. Set the time difference between UTC and the
local time.
3. Push .
Step 19. Saving the repeater list
1. Touch “<<Add Write>>.”
• The conrmation dialog is displayed.
2. Touch [YES].
• The entered contents are saved in the repeater list,
and the display returns to the selected repeater group
screen.
TIP: How to cancel the entered data
1. Push .
• The conrmation dialog is displayed.
2. Touch [YES].
• Cancels the entry and returns to the selected
repeater group screen.