Icom IC-905 - About updating the firmware

15
UPDATING THE FIRMWARE
15-2
General
D About updating the firmware
You can update the IC-905’s rmware and the
CX-10G’s rmware using an SD card. Updating
the rmware adds new functions and/or improves
performance parameters.
You can download the latest rmware from the Icom
website.
https://www.icomjapan.com/support/
IMPORTANT: To update the rmware, rst format
your SD card using the IC-905. Then copy the
downloaded rmware data from your PC into the
“IC-905” folder on the card.
D Checking the firmware version
Check the IC-905’s rmware version when you turn
ON the transceiver.
The rmware version is displayed.
TIP: You can also check the rmware version on the
VERSION screen.
»
SET > Others > Information > Version