Icom IC-R9500 - Page 130

11-6
11
SET MODE
Turns the AF high cut filter circuit ON and OFF in SSB
mode. (default: ON)
(SSB) ON
Turns the AF high cut filter circuit ON and OFF in CW
mode. (default: ON)
(CW) ON
Turns the AF high cut filter circuit ON and OFF in FSK
mode. (default: ON)
(FSK) ON
Turns the AF high cut filter circuit ON and OFF in P25
mode. (default: ON)
(P25) ON
■ Level set mode (continued)
Sets the voice synthesizer audio output level from 0 to
100% in 1% steps. (default: 50%)
Speech Level 50
%
Sets the key-touch beep output level from 0 to 100%
in 1% steps. (default: 50%)
Beep Level 50
%
Turns the key-touch beep output level limiting capa-
bility from ON and OFF. (default: ON)
Beep Level Limit ON
Sets the ratio for audio output level from the head-
phone to the internal speaker from 0.60 to 1.40 range
in 0.01 steps. (default: 1.00)
Phones Level Ratio 1.00
Turns the AF high cut filter circuit ON and OFF in AM
mode. (default: OFF)
(AM) OFF