Ikegami FA-97A - Page 40

24
HDK-99 1803 VER1 (E)
2.1 Camera and Viewfinder
○
24
INTERCOM-1 connector
Connects the INTERCOM-1 intercom headset. It is compatible with XLR series or 110-type
phone jack connectors.
○
25
INTERCOM TALK SELECT switch
Selects the TALK lines for the intercom headset.
PROD : Talks on Production intercom channel.
BOTH : Talks on both Production and Engineering channels.
ENG : Talks on Engineering intercom channel.
○
26
INTERCOM-1 PGM2 control knob
Controls the PGM2 volume of the INTERCOM-1 program intercom.
○
27
INTERCOM-1 PGM1 control knob
Controls the PGM1 volume of the INTERCOM-1 program intercom.
○
28
INTERCOM-1 control knob
Controls the INTERCOM-1 intercom volume.
○
29
INTERCOM-1 MIC switch
Turns ON/OFF the INTERCOM-1 intercom microphone.
ON : Turns ON the intercom microphone.
OFF : Turns OFF the intercom microphone.
PTT : Turns ON the intercom microphone while this switch is pressed.
○
30
RET-2 SELECT switch
Selects the input connected at the CCU as the RET-2 signal sent to the camera.
○
31
RET-1 SELECT switch
Selects the input connected at the CCU as the RET-1 signal sent to the camera.
○
32
MON SDI connector
Outputs the HD SDI signal for monitoring. MAIN, VF, or RETURN can be selected from
the camera menu.