Ikegami FA-97A - Screen Detail Enhancement (DTL)

81
HDK-99 1803 VER1 (E)
5
CAMERA SETTINGS and ADJUSTMENT
5.1 Settings Using Switches on the Camera
Screen Detail Enhancement (DTL)
There are two DTL functions available for selection by the P.Function switch: skin DTL and soft DTL.
Term:
Skin DTL
Skin DTL function suppresses the amount of the edge signals in the skin colored area, while maintaining the DTL setting for the entire
picture. To achieve the best effect, it is important to ensure that the skin DTL function does not affect the clothing and colors appearing
immediately next to the skin colors.
Term:
Soft DTL
In a scene where there is large luminance change, the DTL edge can become high producing an unnatural appearance. The Soft DTL
function acts as a limiter on the maximum white and black edge from the detail system, and can be used to prevent harsh edges.
There are two ways to activate the skin DTL and soft DTL functions: allocating the function to the P.FUNC switch or activating
from the remote controller.
■
Allocating the Function to the P.FUNC Switch
Camera front view
Rotary pulse switch
P.FUNC switch
SET button
1 Set the P.FUNC switch on the front of the camera to ON.
Reference:
Allocate the skin DTL or soft DTL function to the P.FUNC switch in advance. Refer to
"5.1 Settings Using Switches on the
Camera : Allocating Functions to the P.FUNC Switch" (P80)
for how to allocate the function.
■
Activating from the Remote Controller
Reference:
For details on how to operate the various remote controllers, refer to the instruction manuals attached to the remote controllers.