Ikegami FA-97A - Enhancing the Vertical Resolution (Super-V Function)

78
HDK-99 1803 VER1 (E)
5.1 Settings Using Switches on the Camera
Enhancing the Vertical Resolution (Super-V Function)
Super-V function enhances the vertical resolution. It is activated from the camera, MCP, or OCP.
Note:
- The sensitivity of the camera decreases when in the Super-V function mode.
- When a remote controller is connected, the operation of the remote controller has priority over the operation switches on the camera.
Camera right view
(Switch control panel)
Camera front view
SHUTT/SUP-V switchRotary pulse switch
1 Select "1" or "2" from MENU (1/4) "VF DISPLAY" - "DISPLAY MODE."
Characters appear in the viewnder.
Reference:
Refer to
"5.2 Settings from the Menu : Menu Configuration and content" (P85)
for details.
2 Set the SHUTT/SUP-V switch on the right side of the camera to SET.
One of the following modes is displayed:
- Preset shutter speed
- Variable shutter speed
- SUPER-V
Note:
Each time the SHUTT/SUP-V switch is pressed to the SET position, the mode switches are in the order of preset shutter,
variable shutter and SUPER-V.
3 Select "SUPER-V."
Note:
The ashing stops automatically in approximately 3 seconds after the setting operation ends.
4 Press the SET button.
■
To Cancel the Super-V Function
1 Set the SHUTT/SUP-V switch to OFF.