ix
HDK-99 1803 VER1 (E)
HOW TO READ THE OPERATION MANUAL
HOW TO READ THE OPERATION MANUAL
This page explains general notes on reading the HDK-99 Operation Manual, and the symbols and notations used in the manual.
■
Notes on the Manual
- This manual is written for readers with a basic knowledge of handling broadcast cameras.
- The contents of this manual are subject to change without notice in the future.
■
Symbols
The symbols used in this manual are as follows:
CAUTION:
Things you have to be careful during operation. Be sure to read.
Note:
Supplementary information or guidance
Reference:
Sections where related information is available
Term:
Explains the meaning of a term you need to know.
■
Notations
The following notations are used in this manual.
This product, camera Indicates HDK-99. (Including FA-97A)
CCU/BS Camera control unit / Base Station refers to CCU-980 / BS-98
respectively.
OCP Basically indicates OCP-300 Operation Control Panel.
MCP Basically indicates MCP-300 Maintenance Control Panel.
" " - " " - " " Indicates the items enclosed by double quotes (") are to be
selected and conrmed in the order shown.
■
Illustrations and Displays
The illustrations and displays in the text are provided for explanation and may be slightly different from the actual equipment or
image.
■
Related Manuals
- CCU-980 Camera Control Unit Operation Manual
- OCP-300 Operation Control Panel Operation Manual
- MCP-300 Maintenance Control Panel Operation Manual
- BSH-300 Base Station Hub Setup Manual
To Next Page
Loading...
