viii
HDK-99 1803 VER1 (E)
SAFETY PRECAUTIONS
■
Environmental Cautions
Regarding the product
When continuously operating the product in a rainy, cold or hot conditions, use a rain cover, cold-
weather cover, and shade cover respectively.
Avoid storing the product in a dusty place for a long time. If unavoidable, use a dustproof cover.
When shooting in places such as airports, military bases or transmitting stations where magnetic
and radio elds are excessively strong, completely shield the camera by covering it with aluminum
foil.
■
Maintenance
Regarding the product
Before performing maintenance on the product, be sure to turn off the power for safety and for
protection against malfunction.
Clean the product using a dry and soft cloth.
If the stain is hard, soak the cloth with water or detergent, wring well and wipe. If you use
detergent, wipe off the detergent with a cloth that is soaked in just water and wrung well.
■
Notice for Use
- When carrying or storing the product, always use a carrying case.
- Before shooting important subjects, take test shots to obtain the desired effect.
- After using the product, always turn off the power.
■
Regular Maintenance Recommended
This product includes parts that wear out and have a limited life even in proper use or storage. Therefore, regular maintenance is
recommended to extend the life and safe use of this product for a long time. Please contact Ikegami's sales and service centers for
the regular maintenance and repair of our products.
To Next Page
Loading...
