Page 38 Operation Manual
A.13.2 Manual Mode
While working with the Bookeye
®
4 scanner in manual mode, the Cradle Lock button
only signalizes if the magnetic lock is activated (blue) or not (not illuminated).
The glass plate will be hold in closed position until
• a scan sequence is started and finished or
• the Cradle Lock button is pressed and the magnetic lock releases.
A.13.3 Automatic Mode
To increase productivity, the automatic mode is recommended.
Automatic mode differs from the manual mode in one point. After the glass plate is closed
and the magnetic lock is engaged, a scan sequence is triggered automatically with the
defined settings.
Position the document as described in chapter A.13.4.
To activate the automatic mode, press down and hold the Cradle Lock button until the
Cradle Down and Cradle Up buttons blink and illuminated in blue.
In automatic mode, the glass plate lock releases after each scan automatically and the
glass plate moves to the 45 degree position.
The delay before the scan sequence starts can be defined by the administrator in the
setup level User in the Scan2Net® user interface of the scanner.
A.13.3.1 Manual adjustment of the height of the book cradle plates
If the book cradle plates should be positioned at different heights, they can manually be
moved by pressing at one of the plates.
Picture 15: Pushing one side lifts other side simultaneously
To Next Page
Loading...
Need help?
General
