Page 52 Operation Manual
A.15 The “Splitting” Function
Another useful function of the Bookeye
®
4 scanner is the “Splitting” function.
This function splits the scanned document into two separate images. The left and the right
page of an opened book can be scanned in one sequence and subsequently be saved as
two images, or two sheets of paper can be scanned without interruption and saved as two
separate images.
Another benefit is the combination of document mode Auto, format Crop and Deskew
and the “Splitting” function.
A.15.1 “Splitting” function with two separate documents
Picture 23 shows as an example how single pages can be positioned at the book cradle
plates.
Please note: The following pictures show a former version of the Bookeye 4-V2 scanner.
Picture 24: Single pages on book cradle plates
In general: The sheets should have a distance of at least 25 mm (1 inch) to the gap
between the book cradle plates.
The black area around the sheets is necessary for the Auto Format
detection and for the Crop and Deskew function.
Define the settings in the touchscreen menu as follows:
Document Mode: Auto Mode (see B.3.1.1) or Flat Mode (see B.3.1.3)
Format: Crop and Deskew (see chapter B.3.3.3)
Splitting Image: Auto (see chapter B.3.4)
Define the settings in the ScanWizard interface (see Picture 90) as follows:
Size menu Flat Mode or no defined mode, which results in automatic selecting
the matching mode
Size menu Format Auto or Crop and Deskew
Orientation Splitting Image Auto
The second image is delivered after pressing the Scan Now button (touchscreen) or the
Scan Now icon (ScanWizard user interface).
To Next Page
Loading...
Need help?
General
