SD1 Series Inverters Product Overview
-9-
EMI filter
3PH 400V 4kW and above/3PH 230V 1.5kW and
above can comply with IEC 61800-
others can meet requirements of IEC 61800-
3 class
C3 by installing external filter (optional). This series
of products can comply with IEC 61800-
3 class C2
by installing external filter (optional).
Ambient temperature
-10 to 50°C, derate 1% for every increased 1°C
when the temperature is higher than 40°C
Altitude
Below 1000m. If the elevation is above 1000m,
derate 1% for every additional 100m.
Ingress protection (IP)
rating
Note: The inverter with
plastic casing should be
installed in metal distribution cabinet which
conforms to IP20 and the top of which conforms to
IP3X.
Comply with CE requirements
To Next Page
Loading...
