IMO SD1 Series - C2 Filter Model Selection

SD1 Series Inverters Optional Peripheral Accessories
-159-
C.6.5 C2 filter model selection
Model
Input filter
SD1-2.5A-21
SD1-RFC2-10
SD1-4.2A-21
SD1-7.5A-21
SD1-RFC2-10
SD1-10A-21
SD1-2.5A-23
SD1-RFC2-7
SD1-4.2A-23
SD1-7.5A-23
SD1-RFC2-16
SD1-10A-23
SD1-16A-23
SD1-RFC2-32
SD1-20A-23
SD1-30A-23
SD1-RFC2-45
SD1-2.5A-43
SD1-RFC2-7
SD1-4.2A-43
SD1-5.5A-43
SD1-9.5A-43
SD1-RFC2-16
SD1-14A-43
SD1-18.5A-43
SD1-RFC2-32
SD1-25A-43
SD1-32A-43
SD1-RFC2-45
SD1-38A-43
SD1-45A-43
SD1-RFC2-65
SD1-60A-43
SD1-75A-43
SD1-RFC2-100
SD1-92A-43
SD1-115A-43
SD1-RFC2-150
SD1-150A-43
SD1-180A-43
SD1-RFC2-240
SD1-215A-43
Note:
 The input EMI meets the C2 requirements after an input filter is configured.
 The preceding table describes external accessories. You need to specify the ones you
choose when purchasing accessories.