106 5020 Parts & Specifications Manual Part # 99901218
Inspection Checklist
NOTICE:
The user of this form is responsible for determining that these inspections satisfy all applicable
regulatory requirements.
OWNER/COMPANY:
TYPE OF INSPECTION (circle one):
CONTACT PERSON: DAILY MONTHLY QUARTERLY ANNUAL
CRANE MAKE & MODEL: DATE INSPECTED:
CRANE SERIAL NUMBER: HOURMETER READING (if applicable):
UNIT I.D. NUMBER:
INSPECTED BY (print):
LOCATION OF UNIT: SIGNATURE OF INSPECTOR:
TYPE OF INSPECTION
NOTES:
Daily and monthly inspections are to be performed by a “designated” person, who has been selected or assigned by the employer
or the employer’s representative as being competent to perform specific duties.
Quarterly and annual inspections are to be performed by a “qualified” person who, by possession of a recognized degree in an
applicable field or certificate of professional standing, or who, by extensive knowledge, training and experience has successfully
demonstrated the ability to solve or resolve problems related to the subject matter and work.
One hour of normal crane operation assumes 20 complete cycles per hour. If operation exceeds 20 cycles per hour, inspection
frequency should be increased accordingly.
Consult Operator / Service Manual for additional inspection items, service bulletins and other information.
Before inspecting and operating crane, crane must be set up away from power lines and leveled with outriggers fully extended.
DAILY (D): Before each day of operation, those items designated with a (D) must be inspected. This inspection need not be
recorded unless a deficiency (8 ) is found. If the end user chooses to record all daily inspections and those daily inspections
include the monthly inspection requirements, there would be no need for a separate monthly inspection.
MONTHLY (M): Monthly inspections or 100 hours of normal operation (which ever comes first) includes all daily inspections plus
items designated with an (M). This inspection must be recorded.
QUARTERLY (Q): Every three to four months or 300 hours of normal operation (which ever comes first) includes all daily and
monthly inspection items plus items designated with a (Q). This inspection must be recorded.
ANNUAL (A): Each year or 1200 hours of normal operation (which ever comes first) includes all items on this form which
encompasses daily, monthly and quarterly inspections plus those items designated by (A). This inspection must be recorded.
To Next Page
Loading...
Need help?
General
