Intel
®
Omni-Path Fabric Switches
May 2016 Installation Guide
Doc. No.: H76456Rev 3.0US 11
Omni-Path Switches
1.4 Laser Safety Information
This product may use Class 1 laser optical transceivers to communicate over the fiber
optic conductors. The U.S. Department of Health and Human Services (DHHS) does not
consider Class 1 lasers to be hazardous. The International Electrotechnical Commission
(IEC) 825 Laser Safety Standard requires labeling in English, German, Finnish, and
French stating that the product uses Class 1 lasers. Because it is impractical to label the
transceivers, the following label is provided in this manual.
Figure 1. Laser Safety Information
1.5 Electrostatic Discharge Sensitivity (ESDS) Precautions
The assemblies used in the switch chassis are ESD sensitive. Observe ESD handling
procedures when handling any assembly used in the switch chassis.
1.6 License Agreements
Refer to the Intel Software End User License Agreement for a complete listing of all
license agreements affecting this product.
1.7 Technical Support
Intel Technical Support for products under warranty is available during local standard
working hours excluding Intel Observed Holidays. For customers with extended service,
consult your plan for available hours. For Support information, contact your Intel
representative.
To Next Page
Loading...
Need help?
General
