Intel Agilex Series User Manual

1.2. Intel Agilex Configuration Architecture
The Secure Device Manager (SDM) is a triple-redundant processor-based module that manages configuration and the security
features of Intel Agilex devices. The SDM is available on all Intel Agilex FPGAs and SoC devices.
The block diagram below provides an overview of the Intel Agilex configuration architecture which includes the following
blocks:
• SDM: More information about the SDM is contained in later sections.
• Configuration network: The SDM uses this dedicated, parallel configuration network to distribute the configuration
bitstream to Local Sector Managers (LSMs). You cannot access this network.
• LSMs: The LSM is a microprocessor. Each configuration sector includes an LSM. The LSM parses configuration bitstream
and configures the logic elements for its sector. After configuration, the LSM performs the following functions:
— Monitors for single event upsets at the sector level
— Processes responses to single event upsets (SEUs)
— Performs integrity checks in user mode
• Other sub-systems: Refer to the Intel Agilex FPGAs and SoCs Advanced Information Brief for device overview information
about the transceiver tile variants.
1. Intel
®
Agilex
™
Configuration User Guide
683673 | 2021.10.29
Intel
®
Agilex
™
Configuration User Guide
Send Feedback
12

Intel Agilex Series Specifications

General

Architecture	FPGA
AI Tensor Blocks	Yes
Category	FPGA
Family	Agilex
Transceiver Speed	Up to 112 Gbps
Manufacturer	Intel
Series	Agilex
Transceiver Data Rate	Up to 112 Gbps
Memory Support	HBM2E
PCIe Support	PCIe 5.0
Memory	HBM2e
Power Efficiency	Improved over previous generations
Operating Temperature	Commercial, Industrial
Process Technology	10nm