Revision History
For the latest documentation, go to: http://www.intel.com/omnipath/SwitchPublications.
Date Revision Description
June 2019 10.0 • Updated the FM Switch LED description.
• Edge switch product naming. Updated remaining instances of
"unmanaged" to "externally-managed" wherever applicable.
April 2019 9.0 Added Appendix B Director Switch Cable Management on page 90.
February 2019 8.0 • Added an Edge switch cable port connection limitation statement to
the section Cable Distances on page 28.
• The section Updating the Management Module IP Addresses in a
Director Class Redundant Management Configuration on page 75
was updated to use the boot command moduleip.
April 2018 7.0 • Added Figure 57, "48-Port Leaf Module Port Numbering"
• Added Q7 BIOS Update on page 86
April 2017 6.0 • Updated Air Baffle information in "Installing the Airflow Baffles"
• Added module installation information for the Omni-Path Fabric
Edge Hot Swap in "Installing the Edge Switch Hot-Swap Power and
Fan Modules".
December 2016 5.0 Document updated for Revision 5.0
August 2016 4.0 Document updated for Revision 4.0
May 2016 3.0 Document updated for Revision 3.0
February 2016 2.0 Document updated for Revision 2.0
November 2015 1.0 Document updated for Revision 1.0
Revision History—Intel
®
Omni-Path Fabric
Intel
®
Omni-Path Fabric Switches Hardware
June 2019 Installation Guide
Doc. No.: H76456, Rev.: 10.0 3
To Next Page
Loading...
