Chapter 4 — Install Applications on the IF2 with Expanded Memory Option
56 IF2 Network Reader User Manual
Manage Applications
To maximize IF2 resources, you can start, stop, or uninstall IF2
edgeware applications or your installed applications from the web
browser interface. You can also configure applications to auto-start at
boot time. For more information, see the next section.
To manage applications
1 From the menu, click Edgeware Applications > Application
Control. The Application Control screen appears.
The Edgeware Applications section lists all installed edgeware. The
User Applications section lists all applications you have installed
through the web browser interface.
In this screen, you can:
• specify which applications automatically start when the IF2
boots.
• turn applications on and off in real time.
• uninstall applications (except for Developer Tools).
2 Choose an option:
• Check the Auto-Start check box if you want an application to
automatically launch when the IF2 boots.
• Click to stop a running application.
• Click to start an application.
• Click to uninstall an application.
3 Click Activate Changes to save your changes and immediately
make them active.
Note: If you change the date or time on the IF2, stop and restart any
running applications (or reboot the IF2) for the date and time
changes to be made effective.
To Next Page
Loading...
