Chapter 5 — Manage, Troubleshoot, and Upgrade the IF2
IF2 Network Reader User Manual 79
Or, to download an Intermec product manual, click Manual in
the upper right corner.
Follow the prompts to search for and download manuals or other
documentation.
Upgrade Firmware
This section explains how to configure and install firmware upgrades
on the IF2.
To upgrade the firmware
1 Download the Intermec IF2 OS Upgrade Package utility from the
Intermec web site. For help, see the previous section, “Access Web
Pages” on page 78.
2 Run the Upgrade Package utility to configure the firmware
upgrade file. For help, see the next section.
3 Install and run the firmware upgrade file on the IF2. For help, see
“Install the Firmware Upgrade” on page 81.
Make sure the IF2 is connected to a reliable power source before
you upgrade the firmware. Do not cycle power to the IF2 during
the upgrade. If power is lost during the upgrade, the IF2 may
require factory repair.
Note: To upgrade the firmware, use only .bin files provided by
Intermec. Be sure to contact your Intermec RFID system consultant
before upgrading. To locate IF2 upgrades, see the previous section,
“Access Web Pages” on page 78.”
To Next Page
Loading...
