Intermec 1009FF01 - Open a USB Connection to the IF2

Chapter 5 — Manage, Troubleshoot, and Upgrade the IF2
66 IF2 Network Reader User Manual
• You can restore default settings. For help, see “To restore
defaults with a serial connection” on page 72.
• You can open a BRI session.
Open a USB Connection to the IF2
If you are connecting the IF2 using a USB connection, you need:
• a USB cable.
• to create a folder with a gserial.inf and a usbser.sys file.
To connect to the IF2 using the USB port
1 Create a folder to place the gserial.inf and usb.sys file in.
2 Click Start > Programs > Accessories > Notepad.
3 In Notepad, copy and paste the following text:
[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%LINUX%
DriverVer=08/17/2004,0.0.2.0
; Copyright(C)2004 Al Borchers (alborchers@steinerpoint.com)
[Manufacturer]
%LINUX%=GSerialDeviceList
[GSerialDeviceList]
%GSERIAL%=GSerialInstall, USB\VID_0525&PID_A4A7
[DestinationDirs]
DefaultDestDir=10,System32\Drivers
[GSerialInstall]
CopyFiles=GSerialCopyFiles
AddReg=GSerialAddReg
[GSerialCopyFiles]
usbser.sys
Note: USB is not supported on the IF2 with Expanded Memory
Option.