Appendix D — Setup Parameters (IPL)
EasyCoder PD42 Printer User’s Guide 107
USB Keyboard
You can choose between a number of different keyboard layouts,
that can be applied to an external USB keyboard connected to
the printer through the USB Host interface.
Test/Service Setup
Testprint
This part of the Setup Mode allows you to print various types of
test labels.
Config
Choose between software (SW), hardware (HW), and Network
test labels (Network is only available if the printer is equipped
with an EasyLAN Network card).
The Software Configuration Label contains this information:
• Current configuration parameters stored in the printer’s
memory
•Defined pages
•Defined formats
•Defined graphics
• Defined fonts
• Any installed printer options
The Hardware Configuration Label contains this information:
• Printer memory information
•Printer mileage
• Printhead settings
• Firmware checksum, program, and version number
The Network Configuration Label contains this information:
•WINS Name
• MAC Address
• IP Selection
• IP Address
•Netmask
To Next Page
Loading...
Need help?
General