Chapter 4 — Troubleshooting and Maintaining the Printer
40 EasyCoder PD42 Printer User’s Guide
Printer Operation Problems
The following tables list problems that affect the ability of the
printer to operate.
Note: Fingerprint users can obtain an error diagnosis with the
command
SYSHEALTH$. Enter the line PRINT SYSHEALTH$
through a terminal connection to receive the printer’s Ready-to-
Work status.
Display Error Messages (Blue Ready-to-Work LED Blinks)
Error Symbol Error Message Solution
Printhead lifted. Lower printhead.
Maintenance. The printer is upgrading its
firmware. Wait for it to
complete the task.
IP link error. Check if the network cable has
been unplugged
Press feed not done. Press Feed( ) or Testfeed( )
To Next Page
Loading...
Need help?
General