Chapter 2 — Installing the Printer
14 EasyCoder PD42 Printer User’s Guide
Connecting a USB Hub
A USB hub makes it possible to connect several USB devices to
the printer at the same time.
Loading Media
The EasyCoder PD42 can print on labels, tickets, tags, and
continuous stock in various formats. Refer to Appendix B,
“Media Specifications” for more detailed information about
media types, media dimensions and other media specifications.
Loading Media for Tear-Off (Straight-Through) Operation
This section describes the case when media is torn off manually
against the printer’s tear bar. This method is also known as
“straight-through” printing. You can use different types of media
in Tear-Off operation:
• Non-adhesive continuous stock
• Self-adhesive continuous stock with liner
• Self-adhesive labels with liner
• Tickets with gaps, with or without perforations
• Tickets with black marks, with or without perforations
To load media for tear-off operation
1 Open the printer’s side door.
Note: Only one of the devices connected to the USB hub can be a
mass storage device, and only one device can be a Human
Interface Device (keyboard or bar code scanner).
To Next Page
Loading...
Need help?
General