Chapter 3 — Configuring the Printer
EasyCoder PD42 Printer User’s Guide 37
Functions in Extended Testmode
Function Description
Select Media This is the same media setup function as in
Test mode, with the important difference
that the printer performs a slow sensor
calibration (slow testfeed). Performing a
Slow testfeed can be a way to resolve gap/
mark detection problems.
Test La b el s Setu p Info Print configuration labels, one at a time.
Press Acknowledge ( ) to print the next
label. The display indicates which test label
is next.
Dumpmode Enter Dumpmode. For more information
about running Dumpmode, see
“Troubleshooting Communication
Problems” on page 45.
Factory Default Restore factory default settings. Select the
option, and follow instructions in the
display.
Setup and Exit Exit Extended Testmode, enter Setup
mode.
Exit Exit Extended Testmode.
TEST
SELECT MEDIA
To Next Page
Loading...
Need help?
General