Intermec EasyCoder PD42 User Manual

Appendix A — Specification, Interfaces, and Options
EasyCoder PD42 Printer User’s Guide 61
Smooth fonts TrueType and TrueDoc fonts
Resident scaleable fonts 15
Character sets • 23 single-byte character sets standard.
• UTF-8 support as standard.
Resident bar codes 61
Firmware (IPL)
Operating system IPL v10.x.x
Smooth fonts TrueType and TrueDoc fonts
Resident scaleable fonts 13 (+21 simulated bitmap)
Character sets • 23 single-byte character sets standard
• UTF-8 support as standard
Resident bar codes 31
Environment
Operating temperature +5°C to +40°C (+41°F to 104°F)
Storage temperature -20
°C to 70°C (-4°F to 122°F)
Operating humidity 20 to 80% non-condensing
Storage humidity 10 to 90% non-condensing
Media
Media width 25 to 118 mm (1 to 4.6 in)
Max 114 mm (4.5 in) with cutter
Media roll diameter 213 mm (8.4 in) max.
190 mm (7.5 in) with internal rewinder
Internal rewinder
diameter
Max 140 mm (5.51 in)
Media roll core
diameter
38.1 to 76.2 mm (1.5 to 3 in)
Media thickness 60 μm to 250 μm (2.3 to 9.8 mils)
Transfer Ribbon
Material Wax, hybrid, or resin
Winding Ink on either inside or outside of roll
Ribbon width 30 to 110 mm (1.18 to 4.33 in)
Ribbon roll diameter
(outer)
76 mm (2.99 in) equivalent to 450 m (1471
ft) of ribbon.
Printer Specifications (continued)

Intermec EasyCoder PD42 Specifications

General

Brand	Intermec
Model	EasyCoder PD42
Category	Printer
Language	English