Chapter 2 — Configuring Network Settings
32 IF61 Fixed Reader User’s Manual
Developer Access Method Descriptions
Method Description
Enable Web
Server
Enables access to the IF61 via the web browser
interface.
Choose Secure Only to allow only the secure web
interface through port 443.
Choose Secure/Insecure to allow users to log in
using either a nonsecure (HTTP via port 80) or
secure (HTTPS via port 443) web interface.
Choose Disabled to disable web browser access. If
you disable browser access to the IF61, you may need
to access the IF61 via a communications program.
Enable SSH
Server
Enables Secure Shell (SSH) access to the Linux
system console using the same login and password as
the web browser interface (default is
intermec).
SSH access is disabled by default.
Enable FTP
Server
Enables access to the IF61 via its FTP server. For
more information, see “Using the IF61 FTP Server”
on page 91. FTP is disabled by default.
Enable Telnet
Server
Enables access to the Linux system console via
standard Telnet, using the same login and password
as the web browser interface. The default login and
password is
intermec. The Telnet server is disabled
by default.
Enable CIFS/
SMB Service
Enables the Common Internet File System service,
which creates a file sharing connection from a
Windows PC to the /home/developer directory on
the IF61. CIFS/SMB is disabled by default.
When you enable the CIFS/SMB service, entry fields
for a username and password appear. Enter these
settings and then click Activate Changes.
Enable Bonjour
Service
Advertisement
Enables the IF61 to advertise services and be
discovered by Bonjour zero-configuration
networking. Bonjour is enabled by default.
To prevent errors when using Bonjour, make sure the
IF61 hostname does not include spaces. To set the
hostname, see “Configuring Common Network
Settings” on page 27.
Enable UPnP
Discovery
Enables the IF61 to be discovered by Universal Plug
and Play protocols. UPnP is enabled by default.
To Next Page
Loading...
