Intermec PM43 - Cutter Assembly

TITLE
Model
DOCUMENT NO.
PAGE
PM43 Service Work Instructions
PM43,PM43C
SWIPM43x-000
Page
67 of 70
Intermec Proprietary Document
OPERATION:
Cutter Assembly
The batch rewind spool and belt mechanism are part of rewinder full batch take-up kit. The kit is available as an accessory that
include installation instructions. This section does not contain instructions on how to replace the rewinder full batch take-up
kit. The installation and replacement instructions will be covered on next revision of this service work instructions.
Tools Required
Description
Part Number
Torx Driver
T10
Torx Driver
T20
Parts Required
Item
Part Number
Description
Qty
1
203-991-001
Cutter, Accessory Kit, PM43
1
2
203-992-001
Cutter, Accessory Kit, PM43c
1
3
203-993-001
Cutter Vertical Tray, Accessory Kit, PM43
1
Accessories Installation and Replacement
1. All accessories are available in the price guide include installation instructions. See Price Guide under Accessories for both
PM43 and PM43c printer models. Go to http://www.intermec.com/partner-products/prtrpm43a/selling-points.aspx under
Manuals to download the installation instructions for all accessories.