Intermec PM43 - Ribbon Wrinkle Adjustment Mechanism

TITLE
Model
DOCUMENT NO.
PAGE
PM43 Service Work Instructions
PM43,PM43C
SWIPM43x-000
Page
28 of 70
Intermec Proprietary Document
OPERATION:
Ribbon Wrinkle Adjustment Mechanism
This section covers the instruction on how to adjust the ribbon wrinkle for printers with thermal transfer ribbon option. Direct
thermal printer will not have the ribbon wrinkle adjustment mechanism.
Tools Required
Description
Part Number
Torx Driver
T10
Torx Driver
T20
Parts Required
Item
Part Number
Description
Qty
None
Ribbon Wrinkle Adjustment
1. See Steps for instructions on how to adjust the ribbon wrinkle.
Step 1 Step 2
Step 3 Step 4