Intermec PM43 - Screws & Torque Settings

TITLE
Model
DOCUMENT NO.
PAGE
PM43 Service Work Instructions
PM43,PM43C
SWIPM43x-000
Page
69 of 70
Intermec Proprietary Document
Serial Number Label
1. Refer to Print-On-Demand Label Printing System to print the serial number label
2. Refer to Figure 2 for location of the serial number label on the back plate.
Figure 2 – Serial Number Label
OPERATION:
Screws & Torque Settings
1-994059-012
Screw, MRT 4x12 ZP
14 lbf.in/16 kgf.cm
1-994059-008
Screw MRT 4x8 ZP T20 Grip
Secure main logic board (MLB) x5
Secure power supply unit x7
14 lbf.in/16 kgf.cm
1-994059-005
Screw, MRT 3x5 ZP
14 lbf.in/16 kgf.cm
1-994066-08
Screw MRT M2X8 ZP (not setup. Part of the speaker
spare kits)
14 lbf.in/16 kgf.cm
5 lbf.in/6 kgf.cm
1-994058-010
Screw MRT 3X10 FBZ
5 lbf.in/6 kgf.cm
800-593-006
Screw, Plastite, M3x6, PH, Torx, T10
3 lbf.in/3.5kgf.cm
800-619-010
Screw MRT 3X10 FBZ, Nylon Patch
5 lbf.in/6 kgf.cm
2.6 lbf.in/3 kgf.cm
800-593-012
Screw, Plastite, M3x12, PH, Torx,T10
3 lbf.in/3.5kgf.cm