Chapter 2 — Connecting and Configuring the SR61T
10 SR61T Tethered Scanner User’s Guide
Connecting Your SR61T to a Host Computer
To connect your SR61T to a host computer, you need the appropriate
accessory cable. For a list and description of each cable, see “Cable
Accessories” on page 71.
Creating a USB Connection
The USB cable you choose depends on whether your host PC provides
power through the USB port. If your host PC provides power through
the USB port, connect using a standard USB cable. If your host PC
does not provide power through the USB port, connect using a
powered USB cable.
To connect with a standard USB cable
1 Make sure you have the standard USB cable (PN 236-182-xxx).
2 Connect the standard USB cable to your SR61T.
3 Connect the USB cable to the host PC.
4 If necessary, configure your SR61T for an International keyboard.
The default keyboard is North America. For help, see
“International Keyboard Parameters” on page 17.
To connect with a powered USB cable
1 Make sure you have the powered USB cable (PN 236-183-xxx).
2 Connect the powered USB cable to the SR61T and a power supply
(P/N 851-089-105). Plug the power supply to an AC power outlet.
To Next Page
Loading...
Need help?
General
