Appendix — Specifications and Accessories
78 SR61T Tethered Scanner User’s Guide
\60\02\53\24\00\00\00
The table below displays a list of characters you can transmit when
you have character control conversion enabled.
Enabling Alt Mode Parameters
The following data transmission settings allow the SR61T to transmit
special characters to a host computer. For example, if Alt mode is
enabled, the character “Alt+ 0196” is interpreted as “Ä.” When Alt
mode is disabled, “Alt+0196” is transmitted as is.
To use the Alt mode, you must have a PS2/keyboard wedge.
To enable Alt mode:
• Scan the following bar code
\60\02\53\23\00\02\40
To disable Alt mode:
• Scan the following bar code
\60\02\53\23\00\00\00
Control Character Conversion Table
ASCII character Transmitted as
8Backspace
9Tab
13 Enter
27 Escape
To Next Page
Loading...
