Chapter 4 — Configuration Command Reference
56 SR61T Tethered Scanner User’s Guide
Timeout Between Identical Consecutive Codes
This command prevents the same bar code from being decoded more
than once. If you want to decode the same bar code twice, you must
wait until the end of the timeout before scanning it again. Use this
command when consecutively scanning bar codes with identical data,
as opposed to the Timeout Between Different Consecutive Codes
command.
You can set Timeout Between Identical Consecutive Codes to a value
from 0 to 2550 ms.
TLC 39
TLC 39 is a composite symbology designed for the
Telecommunications Industry. TLC 39 combines a Code 39 symbol
that encodes a part number (for items such as plug-in boards at
central switching stations) with a linked MicroPDF417 symbol that
encodes a serial number and other optional information.
The first six characters must be numeric and include the ECI number.
The seventh character is a delimiter between the linear data portion
and the composite data portion, typically a comma, although other
delimiters are allowed. The next piece of data is a mandatory unique
Serial Number.
There can be other data fields after the Serial Number, usually either
AppIDs or DataIDs, which are governed by whether or not there are
alpha characters in the serial number. Country Of Origin is another
typical data field included in this symbology.
Transmission Frame Size
Controls the amount of data sent to the computer by setting the
length of the longest frame the host can receive. You can set the
transmission frame size to a value from 32 to 5120.
To Next Page
Loading...
Need help?
General
