Chapter 4 — Configuration Command Reference
SR61T Tethered Scanner User’s Guide 43
Center Decoding Activation
Enables or disabled the Center Decoding of bar codes. When enabled,
the SR61T reads only the bar code that the laser aimer is centered on.
This parameter is useful for reading bar codes that are positioned
close together.
Center Decoding Tolerance
Allows you to aim the laser beam close to the bar code label you want
to read instead of positioning the aimer right on the bar code. Values
for Center Decoding Tolerance can range from 0 (laser beam must be
positioned on the bar code to be read) to 100 (laser beam can be
positioned beside the bar code to be read).
Codabar
Enables or disables decoding of Codabar symbology. Codabar
is a self-checking, discrete symbology. The American Blood
Commission (ABC) Codabar requires that you retain and transmit the
start/stop code digits when processing a Codabar symbol. As a result,
configuration CD10 is an illegal configuration.
Codablock A
Enables or disables decoding of Codablock A symbology. Codablock
A is a 2D bar code that is an extension of Code 39.
If Code 39 is enabled with check digit, you cannot enable Codablock
A. For best results, disable Code 39 before you enable Codablock A. If
Code 39 is enabled with check digit, Codablock A is not be decoded
properly.
Codablock F
Enables or disables decoding of Codablock F symbology. Codablock F
is a 2D bar code that is an extension of Code 128. If Code 128 is
enabled with check digit, you cannot enable Codablock F. For best
results, disable Code 128 before you enable Codablock F.
To Next Page
Loading...
Need help?
General
