Chapter 2 — Connecting and Configuring the SR61T
14 SR61T Tethered Scanner User’s Guide
Creating a Keyboard Wedge Connection
There are several different keyboard wedge cables available for your
connection to a host PC. You can choose from a standard or an
externally powered cable.
To connect with a standard keyboard wedge cable
1 Turn off your host PC.
2 Make sure you have the appropriate cable. If you host PC does
provide power, use a standard keyboard wedge cable (P/N 236-
186-xxx).
3 Connect the standard keyboard wedge cable to your SR61T and
the host PC.
o
4 Turn on your host PC.
5 If necessary, configure your SR61T for an International keyboard
by scanning bar codes. The default keyboard is North America. For
help, see “International Keyboard Parameters” on page 17.
To connect with a powered keyboard wedge cable
1 Turn off your host PC.
2 Make sure you have the appropriate cable. If your host PC does not
provide power, use the powered keyboard wedge cable (P/N 236-
187-xxx).
3 Connect the powered keyboard wedge cable to your SR61T and a
host a power supply (P/N 851-089-105). Plug the power supply
into an AC power outlet.
To Next Page
Loading...
Need help?
General
