Chapter 4 — Configuration Command Reference
SR61T Tethered Scanner User’s Guide 49
GS1 DataBar Expanded
Enables or disables decoding of GS1 DataBar Expanded. GS1 DataBar
Expanded is an alphanumeric symbology that can read GS1 DataBar
limited and stacked bar code labels. It is a member of the GS1
DataBar symbology family.
GS1 DataBar Limited
Enables or disables decoding of GS1 DataBar Limited. GS1 DataBar
Limited is a numeric symbology that does not read stacked bar code
labels. It is a member of the GS1 DataBar symbology family.
GS1 DataBar Omni-Directional
Enables or disables decoding of GS1 DataBar omni-directional 1D or
stacked 2D codes. GS1 Databar omni-directional is a numeric
symbology that can read stacked omni-directional bar code labels. It is
a member of the GS1 DataBar symbology family.
Hardware/Software Protocol Timeout
Sets the Hardware/Software Protocol Timeout for all supported RS-
232 protocols. The hardware/software protocol is the maximum
length of time that the SR61T waits for a response from a host before
attempting to resent data. You can set the Hardware/Software
Protocol Timeout to a value from 0 to 2550 ms.
Inter-Character Delay
Adds a delay between each character transmitted to the host so that
information transmission is not too fast for the host. You can set
Inter-Character Delay to a value from 0 to 999 ms.
Note: To read GS1 DataBar omni-directional stacked 2D codes, GS1
DataBar Expanded or GS1 DataBar Limited must also be enabled.
To Next Page
Loading...
Need help?
General
