Chapter 4 — Configuration Command Reference
54 SR61T Tethered Scanner User’s Guide
Setup Beep
Enables or disables the setup beep. When you successfully scan
a configuration bar code, you hear the setup beep, and the
configuration of the SR61T is changed.
Special Keys Interpretation
A data transmission setting that allows the SR61T to transmit special
characters that have been encoded in a bar code. For example, if
special keys interpretation is enabled, the character, “.A” is
transmitted as “Delete” to the host computer.
Stacked Code Crackle
SR61TV (linear imager) and SR61TL (laser scanner) only. Enables or
disables the crackle sound when you scan a stacked (2D) bar code.
Standard 2 of 5
Enables or disables decoding of Standard 2 of 5 symbology. Standard
2 of 5 is a low-density numeric symbology that encodes all
information in the bars separated by fixed-width spaces. Standard 2
of 5 is used in warehouse sorting, photofinishing, and airline
ticketing.
Stop Bits
Sets the number of stop bits for communications. You can set Stop
Bits to 1 or 2.
To Next Page
Loading...
Need help?
General
