Appendix — Specifications and Accessories
76 SR61T Tethered Scanner User’s Guide
Wand Emulation Configuration
To configure a wand emulation cable
1 Scan one of the following bar codes:
• To set DBP output to original code, scan
\60\02\48\43\00\00\00
• To set DBP output to Code 39, scan
\60\02\48\43\00\02\40
• To set DBP output to Code 128, scan
\60\02\48\43\00\05\20
2 Scan one of the following bar codes:
• To set Logic Level During Transmission to bar=0, space=1
\60\02\4B\22\00\00\00
• To set the Logic Level During Transmission to bar=1, space=0
\60\02\4B\22\00\02\40
To Next Page
Loading...
