Chapter 4 — Configuration Command Reference
50 SR61T Tethered Scanner User’s Guide
Interleaved 2 of 5
Enables or disables decoding of Interleaved 2 of 5 symbology.
Interleaved 2 of 5 is a high-density, self-checking, continuous numeric
symbology mainly used in inventory distribution and the automobile
industry.
Inter-Message Delay
Adds a delay between each bar code transmitted to the host to avoid
losing information. You can set Inter-Message Delay to value from 0
to 999 ms.
ISCP Activation
The Intermec Scanner Control Protocol (ISCP) is a secure structured
protocol using a frame format to send and receive messages via an RS-
232 port between an Intermec scanner and a host system. ISCP allows
you to easily configure, retrieve information from or control your
scanner directly from the host system.
Japan Post
SR61TA (area imager) and SR61TE (near-far range area imager) only.
Enables or disables decoding of Japan Post 4-state code symbology.
Japan Post is a simple and efficient postal bar coding scheme.
Keyboard Selection
Selects the keyboard you are using with your terminal or cash register.
For help, see “International Keyboard Parameters” on page 17.
LRC
A feature of the Configurable RS-232 Protocol. The scanner appends
the Longitudinal Redundancy Check , which is two characters, to the
end of the data. The LRC characters are calculated by XOR’ing the hex
values of the first two ASCII characters, and then XOR’ing the results
with the next character. This pattern is repeated for all data
characters.
To Next Page
Loading...
Need help?
General
