Intermec SR61T User Manual

Chapter 4 — Configuration Command Reference
SR61T Tethered Scanner User’s Guide 37
Interface Settings
RS-232 Parameter Default Value See Page
Baud rate 57600 41
Data bits 8 46
Parity None 52
Stop bits 1 54
Hardware/software protocol timeout 1000 ms 49
Configurable RS-232 Protocol Not active 45
ENQ Not active 47
ACK Not active 40
NAK Not active 51
LRC Not active 50
Inter-character delay None 49
Inter-message delay None 50
PS/2 Keyboard Wedge Default Value See Page
Keyboard selection North America 50
Override caps lock key Not active 51
Data Transmission Settings
Data Transmission Command Default Value See Page
ISCP
ISCP activation Active 50
Data format Raw 46
Transmission frame size (TFS) 4096 56
Event notification Not active 47
Symbology identifier Not transmitting 55
Preamble None 53
Postamble <CR><LF> 52
Data editing N/A 46
Alt Mode Not active 41
Control character conversion Active 45

Intermec SR61T Specifications

General

Brand	Intermec
Model	SR61T
Category	Barcode Reader
Language	English