Intermec SR61T User Manual

Chapter 4 — Configuration Command Reference
SR61T Tethered Scanner User’s Guide 39
PDF417 active 52
Planet Not active 52
Postnet Not active 53
QR Code Not active 53
Standard 2 of 5 Not active 54
Telepen Not active 55
TLC 39 Not active 56
Operating Settings
Trigger Activation Command Default Value See Page
Trigger mode Level 57
Trigger timeout 2 seconds 57
Turn off after good read Active 58
Data Decoding Security Command Default Value See Page
Predefined security levels Normal 53
Consecutive same read data
validation
Auto read count
before transmission
45
Timeout between identical
consecutive codes
300 ms 56
Timeout between different
consecutive codes
None 55
Center Decoding Command Default Value See Page
Center decoding activation Not active 43
Center decoding tolerance No tolerance 43
Beeps/LED Command Default Value See Page
Beep and LED Mode SR61T default mode 41
Beep volume High 42
Symbology Settings (continued)
Symbology Default Value See Page

Intermec SR61T Specifications

General

Brand	Intermec
Model	SR61T
Category	Barcode Reader
Language	English