Interroll MultiControl
38 Version 2.3 (01/2017) en-US
Translation of original instruction manual
Decommissioning and disposal
Shutdown
CAUTION
Risk of injury due to incorrect handling
4 Shut-down may only be executed by qualified and authorized persons.
4 Shut down MultiControl only in de-energized state. Secure MultiControl against inadvertent
activation.
4 Disconnect all cables from the MultiControl.
4 Loosen the screws with which the MultiControl is fastened to the base plate and pull off
MultiControl.
4 If the MultiControl is to be completely disassembled, also loosen the screws with which the
base plate is fastened to the conveyor frame and remove the base plate from the conveyor
frame.
Disposal
The operator is responsible for the proper disposal of the MultiControl.
4 In doing so, industry-specific and local provisions must be observed for the disposal of the
MultiControl and its packaging.
4 The packaging must be recycled to provide environmental relief.
To Next Page
Loading...
Need help?
General
