Interroll MultiControl
Version 2.3 (01/2017) en-US
Translation of original instruction manual
7
Safety
State of the art
The MultiControl has been built to comply with the state of the art and is operationally safe in its
delivered state. Nevertheless, users may encounter hazards during use:
Disregarding the notices in this manual may lead to serious injury.
4 Carefully read the manual and follow its content.
Intended use
The MultiControl may only be used for industrial applications and in an industrial environment to
control a RollerDrive EC310 or a VDC motor. A corresponding adapter must be used to connect
a VDC motor.
The MultiControl must be integrated into a conveyor module or conveyor system. Any other use
is considered inappropriate.
Any modifications that affect the safety of the product are not permitted.
The MultiControl may only be operated within the defined operating limits.
Deviating applications require the approval of Interroll.
Personnel qualification
Unqualified personnel cannot recognize risks and, as a result, is subject to greater dangers.
4 Authorize only qualified personnel with the activities described in these installation and
operating instructions.
4 The operating company must ensure that the personnel follows locally applicable regulations
and rules during their work with regard to safety and dangers.
The following target groups are addressed in these installation and operating instructions:
Operators
Operators have been instructed in the operation and cleaning of the MultiControl and follow
the safety guidelines.
Qualified person
A specialist is a person who, based on his relevant technical training, education and experience,
is capable of detecting risks and avoiding dangers that could occur during the use of the
product.
Electricians
Persons working on electrical installations must have the pertinent technical training. They require
suitable training, suitable education and experience that enables them to detect risks and avoid
dangers which could originate from the electricity. (IEC 60204-1)
To Next Page
Loading...
Need help?
General
