Interroll MultiControl
6 Version 2.3 (01/2017) en-US
Translation of original instruction manual
Introduction
Information about the manual
Contents
This manual contains important notes and information about the various operating phases of the
MultiControl.
The manual describes the MultiControl as it is delivered by Interroll.
In addition to this manual, special contractual agreements and technical documents apply to
special versions.
The manual is part of the
product
4 For trouble-free, safe operation and warranty claims, read the manual first and follow the
instructions.
4 Keep the manual near to the MultiControl.
4 Pass the manual on to any subsequent operator or occupant.
4 NOTICE! The manufacturer does not accept any liability for faults or defects due to
non-observance of this manual.
4 If you have any questions after reading the operating instructions, please contact the Interroll
customer service. Contact persons close to you can be found on the Internet under
www.interroll.com/contacts.
Warning notices in this manual
The warning notices refer to risks which may arise while usage the MultiControl. They are
available in four danger levels identified by the signal word:
Signal word Meaning
DANGER Identifies a danger with high risk that can lead to death or serious injury if it
is not avoided.
WARNING Identifies a danger with medium risk that can lead to death or serious injury
if it is not avoided.
CAUTION Identifies a danger with low risk that can lead to minor or medium injury if it
is not avoided.
NOTICE Identifies a danger that can lead to property damages.
Symbols
This symbol marks useful and important information.
Requirement:
R This symbol represents a prerequisite to be met prior to assembly and maintenance work.
4 This symbol marks the steps to be carried out.
To Next Page
Loading...
Need help?
General
