6700SR Refrigerated Sampler
58
E
RROR
C
ODES
DJ D
ISTRIBUTOR
J
AMMED
The distributor jammed.
IP
SAMPLE
IN
PROGRESS
Sample in progress when report was printing.
L
PUMP
LATCH
OPEN
Unable to take sample because the pump band was opened.
ND
NO
DISTRIBUTOR
ARM
There is no distributor arm or the stop is damaged.
NL N
O
L
IQUID
D
ETECTED
The sampler was unable to detect liquid.
NM N
O
M
ORE
L
IQUID
After the sampler detected liquid and while the sample was being taken, the liquid detector
stopped detecting liquid.
MB
OTTLE
F
ULL
The composite bottle is full.
OS
AMPLER
S
HUT
O
FF
The sampler was turned off with the On-Off key during the sample event.
O
V
P
ROBABLE
O
VERFLOW
The sampler was directed to take a sample that would not fit into the bottle. Occurs for flow
paced, time override programs only.
PP
OWER
F
AILED
The power supply failed during the sample event.
PJ P
UMP
J
AMMED
The pump jammed.
S
K
S
AMPLE
S
KIPPED
Sample not taken.
US U
SER
S
TOPPED
You pressed the Stop key during the sample event.
P
ROGRAM
E
VENTS
‘A’/’B’ D
ONE
The sampler finished program part ‘A’ or ‘B’.
‘A’/’B’ E
NABLED
(D
ISABLED
) Program part ‘A’ or ‘B’ was enabled or disabled according to the program’s settings.
‘A’/’B’ P
AUSED
(R
ESUMED
) Program part ‘A’ or ’B’ reached a programmed pause or resume time.
A
DJUSTED
L
EVEL
The level measured by a flow module was adjusted while manually paused.
C
ALIBRATE
S
AMPLE
The sample volume was calibrated while in the Manual Paused state.
C
HANGED
S
UCTION
H
EAD
The suction head was changed while in the Manual Paused state.
E
NABLE
C
HANGED
Sampler enable thresholds were changed while in the Manual Paused state.
G
RAB
S
AMPLE
A grab sample was taken while in the Manual Paused state.
I
NTERVAL
C
HANGED
Sample pacing was changed while in the Manual Paused state.
M
ANUAL
P
AUSE
Stop was pressed during the program to enter the Manual Paused state.
M
ANUAL
R
ESUME
The resume program option was selected from the Manual Paused state.
P
OWER
F
AILED
The power source was disconnected.
P
OWER
R
ESTORED
The power source was reconnected.
P
ROGRAM
D
ONE
The sampler finished the sampling program.
P
ROGRAM
E
NABLED
(D
ISABLED
) The sampler was enabled or disabled according to program settings.
P
ROGRAM
P
AUSED
(R
ESUMED
) The program reached a programmed pause or resume time.
P
ROGRAM
S
TARTED
The sampler started the sampling program.
P
ROGRAM
S
TOPPED
You selected Stop from the manual paused options, terminating the program.
P
UMP
T
UBE
R
EPLACED
The pump tube alarm was reset while in the Manual Paused state.
S
AMPLE
S
KIPPED
Sampler was in Manual Paused state when a sample event was initiated.
S
AMPLER
E
NABLED
(D
ISABLED
) The sampler was enabled or disabled by an external instrument.
V
OLUME
C
HANGED
Sample volume was changed while in the Manual Paused state.
V
OLUME
D
ELIVERED
The volume actually delivered (entered by the user) during sample volume calibration.
Table 9 (continued): Reports: Source Codes, Error Codes, and Program Events
To Next Page
Loading...